Sweet Corn Thresher Machine With Corn Peeler Function Electric Motor Powered

Uses Of Maize Sheller Corn Thresher Machine Corn Peeler And Thresher

Working principle:

1. During operation,the corn is fed from the feeding port,due to rotary strike of corn by screw propeller

shaft,corn was separated by sieve,corncob was discharged from the machine end.

2. The feed inlet is set on the upper right of the top cover, which has two kinds of inclined and vertical type.

Application and general adjustment of Corn thresher machine:

1.Tear the level of the net rate by adjusting the nut the bottom of the rocker arm bearing,
roller tightly pressed together by a spring pressure, tear the net rate is low, tighten the
adjusting nut, increase the spring pressure or adjust the box of rubber adjustment board,
there are four adjusting nut on board available for adjustment.
2.During the tearing skin, you should try to avoid the vertical feeding, should be timely clear
up the bract and cluster from inside and outside of the machine, otherwise, easily cause
bract winding the shaft and blocking the outlet.

Specification:

Warning of Corn thresher machine:

1, bract winding the axis affect tear the skin effect, should a timely process;
2, the feeding volume is not too much, otherwise prone to clogging, there may be broken grain.
Advantages of Corn thresher machine:
1.Of two functions-- peeling and threshing corn maize, saving labor and money than the single
function machine
2. Full automatic, compact designed and it is very easy to operate.
3. Able to separate the corn from the corn body without breaking the corn cob. Capable to
clearly separate the corn from the corn body and threshing-winnowing the corn at one time
4. Mainly applies to shell and thresh the fresh sweet corn and waxy corn quickly.
5. Also suitable for threshing the grain form all kinds of fresh, sweet and sticky corn,
applicable for the freezing and defreezing corn, too.